In this guide: How each one works · Quick comparison · When to use each one · Three questions before deciding

Screening is the first barrier in a treatment plant: it removes fibers, hair, process residues and coarse solids before they reach pumps, reactors or flotation units. A poorly chosen screen blinds, lets solids through or needs constant cleaning. The three most widely used units are the static parabolic screen, the internally fed rotary drum screen and the externally fed rotary drum screen.

How each one works

Static parabolic screen. The effluent enters a distribution chamber, where turbulence keeps solids in suspension, and then overflows onto a curved screen with slots perpendicular to the flow. The liquid passes through the slots and the solids slide down the surface to the discharge. It has no moving parts and no power consumption.

Internally fed rotary drum screen. The effluent enters the inside of a rotating drum. Solids are retained on the inner face and the liquid exits radially outwards. Internal flights carry the solids to the discharge, and an external spray bar cleans the screen on every turn.

Externally fed rotary drum screen. The effluent is distributed over the top of the drum from the outside. Solids stay on the outer surface and a scraper removes them as the drum turns, while the filtered water falls through the inside of the drum. It combines a scraper, internal cleaning and wash nozzles.

Quick comparison

Criterion Static parabolic screen Internally fed rotary Externally fed rotary
Slot opening 0.2 to 3 mm 0.2 to 10 mm 0.25 to 2.5 mm
Moving parts No Yes (gear motor) Yes (gear motor)
Power consumption None Low Low
Screen cleaning By sliding action; optional rear nozzles External spray bar Scraper and internal washing
Fibrous or greasy solids Tends to blind Very good performance Good performance
Odor control Open unit Enclosed version available Open unit
Investment Lowest Higher Medium

When to use each one

Static screen, when the simplest and most economical solution is the goal: moderate flows, non-sticky solids and plants that prefer to avoid motorized equipment. With no moving parts, maintenance is minimal. It needs available head to be fed by overflow, and with greasy effluents the rear wash system is worth adding.

Internally fed rotary drum screen, when the effluent carries a high load of solids, fibers or grease: meat processing, poultry, fish processing, paper mills and municipal sewage. It retains solids inside the drum and the spray bar keeps the screen open. The BRS series covers flows from 12 to 3,000 m³/h, and the enclosed BRS/R version contains vapors and odors.

Externally fed rotary drum screen, when fine separation with continuous scraper cleaning is needed: dairy, textiles, tanneries, mining and food processing. The ERS series works with openings from 0.25 to 2.5 mm, and its triple cleaning system keeps it stable with fine solids.

Three questions before deciding

  1. How much solids and grease does the effluent carry? With high loads or fibrous solids, the internally fed rotary screen is the most robust. With low loads, the static screen is enough.
  2. What particle size must be retained? It defines the slot opening: the finer it is, the more important the continuous cleaning of a rotary screen becomes.
  3. Is there available head and space? The static screen needs a level difference to be fed by gravity; rotary screens are more compact for the same flow.

Retained solids are discharged with a high water content. A solids compactor reduces their volume and a screw conveyor carries them to the container. Downstream, if the effluent still carries grease, a DAF completes the separation.

Not sure which screen your plant needs? Send us the flow, the effluent type and the solids size and we will recommend the right unit and opening.