It is an advanced online intelligent multi-parameter controller capable of supporting up to two channels. The hybrid mode of the first channel allows the connection of analog or digital sensors, while the second channel connects digital sensors. This controller can measure a variety of parameters including pH, ORP, conductivity, dissolved oxygen, turbidity, sludge concentration, residual chlorine, ammonia nitrogen, nitrate nitrogen, COD, and more. Its continuous monitoring data can be transmitted to a DCS system via output streaming or communicated with a computer using Modbus-RTU protocol via RS485 interface for remote monitoring and logging. It can also control cleaning systems or pumps.
Product photos
PH
In wastewater treatment and in fields including mining and smelting, paper making, pulp and paper, textiles, petrochemical industry, semiconductor electronics industry processes and further biotechnology engineering.
Product photos
EC (Conductivity)
SUP-TDS8001 digital conductivity electrode is a conductivity and salinity detection module designed for aquaculture, environmental water treatment, industrial processes and other industries. It is equipped with a two-pole graphite sensor and can be used to measure conductivity and salinity in the aqueous system within the value change range.
Product photos
SS/SST (Total Suspended Solids)
SUP-PTU200 suspended solids meter is based on infrared absorption scattered light method and combined with the application of ISO7027 method to ensure continuous and accurate detection of suspended solids and sludge concentration. Based on ISO7027, the infrared double scattered light technology will not be affected by chroma for the measurement of sludge concentration values and cusp colloids. According to the use environment, it can be equipped with self-cleaning function.
Product photos
DO (Dissolved Oxygen)
The fluorescent dissolved oxygen sensor adopts a new generation of fluorescence lifetime technology and high-performance fluorescent materials developed in-house. No oxygen consumption, no flow rate limitation, no need for electrolyte, no maintenance or calibration, no hydrogen sulfide interference, and excellent stability. Built-in temperature sensor, automatic temperature compensation. RS485 output, can be networked without a driver.
Product photos
Turbidity
Range: 0.01-100 NTU 、0.01-4000 NTU
Resolution: Less than ± 2% of the measured value
Pressure range: ≤0.4MPa
Power supply: AC220V±10%; 50Hz/60Hz
Product photos
ORP
Features:
- Zero potential point: 7 ± 0.5 pH
- Output: RS485
- Installation size: 3/4NPT
- Communication: RS485
- Power supply: 12VDC