In this guide: What is a filter press · Main components · How the cycle works · Plate types · Expected cake dryness · Applications · How to size one · FAQ

The filter press is the dewatering equipment that delivers the driest cake. That is why it is the benchmark in mining, chemicals, ceramics and any plant where every point of moisture left in the sludge is paid for later in transport and final disposal. This guide explains what a filter press is, how its cycle works, which plate types are available and what data you need to size one.

What is a filter press

A filter press is a pressure-driven solid-liquid separation unit. The sludge or slurry is pumped into a pack of closed plates covered with filter cloths. The liquid passes through the cloth and leaves as filtrate; the solids are retained between the plates and build up a compact cake that is discharged at the end of the cycle.

Unlike a screw press or a belt filter press, a filter press works in batches: it fills, filters, opens, discharges and starts again. This mode of operation is precisely what allows it to apply more pressure to the sludge and produce a drier cake and a cleaner filtrate.

Main components

  • Frame: fixed head, moving head and side or overhead beams that carry the plates.
  • Plate pack: the heart of the unit. Each pair of plates forms a chamber where the cake builds up.
  • Filter cloths: they cover the plates and determine which particles are retained. The right cloth depends on the type of solids, pH and temperature.
  • Closing system: a manual or automatic hydraulic unit clamps the plate pack so there are no leaks during filtration.
  • Feed: a pump delivers the sludge under pressure. Thickened sludge is fed with progressive cavity pumps, which do not break the floc.
  • Filtrate collection: collects the liquid passing through the cloths, in open or closed execution.
  • Options: automatic plate shifting, automatic cloth washing, quick opening, drip tray, cake hoppers and conveyors.

How it works: the cycle step by step

  1. Closing. The hydraulic unit closes the plate pack.
  2. Filling. The pump fills the chambers with sludge. At first the flow is high and the pressure low.
  3. Filtration. Particles deposit on the cloth and form the cake, which then acts as the filter medium. As the cake grows, pressure rises and filtrate flow drops. Standard plates typically operate up to about 7 bar; high-pressure plates allow higher values.
  4. Squeezing (membrane plates only). At the end of filtration, the membrane is inflated with compressed air or pressurized water. It squeezes the cake and removes additional water within a few minutes.
  5. Cake washing or air blowing (optional). Used when the retained liquid must be recovered or the solids washed.
  6. Opening and discharge. The pack opens and the plates are separated one by one, manually or automatically. The cake drops into a hopper, container or conveyor.
  7. Cloth washing. Cloths are washed periodically to keep their filtration capacity. This can be automated.

A complete cycle typically takes 1 to 4 hours, depending on the sludge type, feed concentration and plate type.

Plate types

The choice of plate determines cake dryness, cycle time and the robustness of the unit:

  • Chamber plates. The standard option: simple, robust and reliable. Suitable for small treatment plants as well as industrial processes.
  • Membrane plates. Add a squeezing stage with air or water at the end of filtration. They achieve higher dewatering, shorter cycles and more process flexibility.
  • CGR gasketed plates. Provide a tight seal that prevents product contact with the environment and filtrate loss. Useful with volatile, odorous or valuable products.
  • High-pressure plates. Pressurize the membranes with air or water to further reduce cake moisture at the end of the cycle.
  • Stainless steel plates. For high temperature, high pressure, sanitary service or greater chemical resistance. Available in AISI 304 and AISI 316.

All of them are combined with the right cloth for each application: we offer more than 100 different cloths. We also manufacture replacement plates and cloths compatible with other brands, including Meura mash filters.

What cake dryness to expect

Cake dryness depends mainly on the sludge type and its conditioning, more than on the equipment. As a reference, these are typical industry values:

Sludge type Chamber plates Membrane plates
Biological (municipal or industrial) 20 to 30 % solids 25 to 35 % solids
Physical-chemical (with coagulant or lime) 30 to 40 % solids 35 to 45 % solids
Mineral, mining, ceramics, quarries 60 to 80 % solids 65 to 85 % solids

For a reliable figure for your plant, the right approach is a test with a sample of your sludge.

Applications

  • Dewatering of industrial and municipal sludge.
  • Liquid-solid separation in process applications.
  • Mining, metallurgy and ceramics.
  • Chemicals, drinking water, pharmaceuticals and oil.
  • Food processing, edible oil plants, breweries and wineries.
  • Quarries and gravel pits.
  • Special applications with custom designs, including explosion-proof configuration for flammable chemicals.

How to size a filter press

The size of the unit comes from the cake volume to be formed in each cycle. The data needed are:

  • Sludge flow and concentration, to calculate kilograms of dry solids per day.
  • Sludge type and origin.
  • Operating hours per day and number of possible cycles.
  • Target cake dryness.

Example. A plant generates 1,000 kg of dry solids per day and runs 3 cycles a day. Each cycle handles about 333 kg of dry solids. With a cake at 25 % solids, that is about 1,333 kg of cake. With a typical cake density of around 1.1 t/m³, the volume is about 1,210 liters. Adding a 15 to 20 % margin, about 1,450 liters of chamber volume are needed: a unit with 1,000 x 1,000 mm plates.

Ranges of our units by plate size:

Plates (mm) Filtration area (m²) Volume (liters)
2000 x 2000 560 to 1,180 8,400 to 17,700
1500 x 1500 200 to 560 3,540 to 9,810
1250 x 1250 100 to 320 1,574 to 4,880
1000 x 1000 60 to 160 923 to 2,381
800 x 800 10 to 60 157 to 955
630 x 630 6 to 20 90 to 290
400 x 400 1 to 5 15 to 75

Sludge conditioning matters as much as the size of the unit. With biological sludge, stable polymer dosing is key; an automatic polymer preparation and dosing system prevents uneven flocculation and overdosing.

Frequently asked questions

What is the difference between chamber plates and membrane plates?
Chamber plates filter only with the pump pressure. Membrane plates add a final squeezing stage with air or water that removes more water and shortens the cycle.

How long does a filtration cycle take?
Typically 1 to 4 hours. It depends on the sludge type, its concentration, conditioning and plate type.

Does a filter press need polymer?
Biological sludge almost always needs conditioning with polymer or coagulant. Mineral slurries are often filtered without additives.

Can it be automated?
Yes. Closing, plate shifting, quick opening and cloth washing can all be automated, keeping operator intervention to a minimum.

How often are the cloths replaced?
It depends on the abrasiveness of the solids, the pH and how often they are washed. Under normal conditions they last from several months to a couple of years.

Do you make plates and cloths for other brands of filter presses?
Yes. We manufacture chamber and membrane plates and filter cloths compatible with other brands, including Meura mash filters. We quote from a photo or a drawing.

Need a filter press or spare parts for your unit? Send us your sludge data (flow, concentration and origin) and we will recommend the right equipment.